Each volunteer participating in NeRAIN is equipped with:

• A clear plastic high capacity rain gauge with mounting bracket
• A packet of information and forms for recording data

Instructions for mounting your Rain Gauge.

When installing the rain gauge it is important to consider its location. The gauge should be placed in an area that is protected from strong winds but is not bothered by obstacles that could either block precipitation from reaching the gauge or cause precipitation to splash towards it. For example, an ideal location would be a small open meadow surrounded by forest, or an open back yard not too close to buildings or trees. The gauge should be installed 2-5 feet above the ground mounted on the side of a single post. The top of the rain gauge should extend several inches above the top of the mounting post. The mounting post should have a rounded, pointed, or slanted top to avoid upward splash towards the rain gauge.

The rain gauge should be installed at a reasonable distance away from obstacles such as buildings and trees. As a rule of thumb, if a tree is 40ft. tall (taller than a two story house) the gauge should be placed at least 80ft. downwind from it. This will help avoid potential blockage of the rain gauge. It is not always possible to find a perfect location. When in doubt, do your best.

Things to Remember: When mounting a rain gauge.

• Avoid large obstacles that could block precipitation.
• Avoid mounting the rain gauge were sprinklers or other sources of artificial precipitation can affect the data.
• Make sure the top of the rain gauge is level.
• Mount the rain gauge so that heavy rain could not splash into the gauge from any nearby surfaces.
• Mount the rain gauge in an area protected from strong wind, if possible.

Maintenance.

Please clean rain gauge periodically using a mild detergent and a soft bottlebrush. Do Not let water freeze inside the gauge as it can cause the plastic to crack. During the summer, make sure no water from nearby sprinkler systems can get in your gauge